Fluidrain

TEC44   

The TEC-44 is a microprocessor operated ball valve, designed to remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers. 

The TEC-44 is designed to remove high viscosity effluents at pressure ratings up to 40 Bar.
This condensate drain can not be blocked and is applied where everything else fails.

Draining applications with a high level of contamination (rust, scale etc.) require the TEC-44. The TEC-44 is impossible to block due to its powerfull ball valve rotation and large orifice.
 
Technical specifications:
  • Interval (OFF) time 4 minutes to 24 hours, or by Remote Switching7,5 seconds to 15 minutes
  • Discharge (ON) time Yes
  • Manual TEST switch 115 or 240VAC/DC 50/60Hz
  • Supply voltage 0ºC to +60ºC
  • Operating temperature Weatherproof, IP65
  • Environmental protection Nickel plated brass, stainless steel ball 1/2", BSP orNPT
  • Valve type 40 Bar
  • Connection LED to indicate valve OPEN, LCD indicating program cycle
  • Maximum pressure
  • Indication Battery back-up pack protecting against power failure
  • Back-up FPM and Teflon
  • Anti-blockage system
Valve seals

Fluidrain

TEC44   

The TEC-44 is a microprocessor operated ball valve, designed to remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers. 

The TEC-44 is designed to remove high viscosity effluents at pressure ratings up to 40 Bar.
This condensate drain can not be blocked and is applied where everything else fails.

Draining applications with a high level of contamination (rust, scale etc.) require the TEC-44. The TEC-44 is impossible to block due to its powerfull ball valve rotation and large orifice.
 
Technical specifications:
  • Interval (OFF) time 4 minutes to 24 hours, or by Remote Switching7,5 seconds to 15 minutes
  • Discharge (ON) time Yes
  • Manual TEST switch 115 or 240VAC/DC 50/60Hz
  • Supply voltage 0ºC to +60ºC
  • Operating temperature Weatherproof, IP65
  • Environmental protection Nickel plated brass, stainless steel ball 1/2", BSP orNPT
  • Valve type 40 Bar
  • Connection LED to indicate valve OPEN, LCD indicating program cycle
  • Maximum pressure
  • Indication Battery back-up pack protecting against power failure
  • Back-up FPM and Teflon
  • Anti-blockage system
Valve seals

Fluidrain

TEC44   

The TEC-44 is a microprocessor operated ball valve, designed to remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers. 

The TEC-44 is designed to remove high viscosity effluents at pressure ratings up to 40 Bar.
This condensate drain can not be blocked and is applied where everything else fails.

Draining applications with a high level of contamination (rust, scale etc.) require the TEC-44. The TEC-44 is impossible to block due to its powerfull ball valve rotation and large orifice.
 
Technical specifications:
  • Interval (OFF) time 4 minutes to 24 hours, or by Remote Switching7,5 seconds to 15 minutes
  • Discharge (ON) time Yes
  • Manual TEST switch 115 or 240VAC/DC 50/60Hz
  • Supply voltage 0ºC to +60ºC
  • Operating temperature Weatherproof, IP65
  • Environmental protection Nickel plated brass, stainless steel ball 1/2", BSP orNPT
  • Valve type 40 Bar
  • Connection LED to indicate valve OPEN, LCD indicating program cycle
  • Maximum pressure
  • Indication Battery back-up pack protecting against power failure
  • Back-up FPM and Teflon
  • Anti-blockage system
Valve seals

Fluidrain

TEC44   

The TEC-44 is a microprocessor operated ball valve, designed to remove condensate from deliquescent dryers, tanks, vessels and refrigerated dryers. 

The TEC-44 is designed to remove high viscosity effluents at pressure ratings up to 40 Bar.
This condensate drain can not be blocked and is applied where everything else fails.

Draining applications with a high level of contamination (rust, scale etc.) require the TEC-44. The TEC-44 is impossible to block due to its powerfull ball valve rotation and large orifice.
 
Technical specifications:
  • Interval (OFF) time 4 minutes to 24 hours, or by Remote Switching7,5 seconds to 15 minutes
  • Discharge (ON) time Yes
  • Manual TEST switch 115 or 240VAC/DC 50/60Hz
  • Supply voltage 0ºC to +60ºC
  • Operating temperature Weatherproof, IP65
  • Environmental protection Nickel plated brass, stainless steel ball 1/2", BSP orNPT
  • Valve type 40 Bar
  • Connection LED to indicate valve OPEN, LCD indicating program cycle
  • Maximum pressure
  • Indication Battery back-up pack protecting against power failure
  • Back-up FPM and Teflon
  • Anti-blockage system
Valve seals