Screw compressors

FLEX   Power class: 3 - 30 kW

 
Up to 35% energy savings, thanks to SCD technology
 
Power class: 3 - 30 kW
 
The speed-controlled, direct-driven screw compressors in the FLEX series, have been specially developed according to the most recent findings in research and technology. They are used in all situations where compressed air needs to be generated by a small, compact and extremely quiet plant, even directly in the workplace.
 
It is precisely in this area that, with its integrated single-shaft solution, the FLEX series provides TOP -totally uncompromising technology in the speed-controlled version:
 
Compact, fully integrated compressor unit.
High performance, virtually silent, small footprint.
Energy-saving speed control.
Direct drive without transmission losses (single shaft solution).
Flexible operating pressure 5 - 13 bars, infinite adjustment.
Clear, easy-to-maintain set-up.
The "integriated single-shaft solution" from ALMiG.
(Image equivalent in structure to the FLEX 6 - 30).
Market analyses show that on average capacity utilisation of compressors is around 50 - 70%. The maximum delivery quantity is only required at peak times. This has prompted us to develop the ALMiG SCD technology which demonstrates its greatest strength in the partial load range, i.e. exactly where it is required. 
 
SCD technology stands for:
  • Speed Controlled and
  • Direct drive
  • The combination of speed control and direct drive, results in an extremely efficient, holistic drive concept.
Do you have money to give away?

The up to 35% energy saving potential is achieved by means of:
 
  • Speed control
  • Constant, 5 - 13 bar network pressure, infinitely adjustable.
  • Extremely good plant efficiency.
  • No starting or switch-over peak loads.
  • No expensive idling time.

 

Download brochure here (368kB)

Screw compressors

FLEX   Power class: 3 - 30 kW

 
Up to 35% energy savings, thanks to SCD technology
 
Power class: 3 - 30 kW
 
The speed-controlled, direct-driven screw compressors in the FLEX series, have been specially developed according to the most recent findings in research and technology. They are used in all situations where compressed air needs to be generated by a small, compact and extremely quiet plant, even directly in the workplace.
 
It is precisely in this area that, with its integrated single-shaft solution, the FLEX series provides TOP -totally uncompromising technology in the speed-controlled version:
 
Compact, fully integrated compressor unit.
High performance, virtually silent, small footprint.
Energy-saving speed control.
Direct drive without transmission losses (single shaft solution).
Flexible operating pressure 5 - 13 bars, infinite adjustment.
Clear, easy-to-maintain set-up.
The "integriated single-shaft solution" from ALMiG.
(Image equivalent in structure to the FLEX 6 - 30).
Market analyses show that on average capacity utilisation of compressors is around 50 - 70%. The maximum delivery quantity is only required at peak times. This has prompted us to develop the ALMiG SCD technology which demonstrates its greatest strength in the partial load range, i.e. exactly where it is required. 
 
SCD technology stands for:
  • Speed Controlled and
  • Direct drive
  • The combination of speed control and direct drive, results in an extremely efficient, holistic drive concept.
Do you have money to give away?

The up to 35% energy saving potential is achieved by means of:
 
  • Speed control
  • Constant, 5 - 13 bar network pressure, infinitely adjustable.
  • Extremely good plant efficiency.
  • No starting or switch-over peak loads.
  • No expensive idling time.

 

Download brochure here (368kB)

Screw compressors

FLEX   Power class: 3 - 30 kW

 
Up to 35% energy savings, thanks to SCD technology
 
Power class: 3 - 30 kW
 
The speed-controlled, direct-driven screw compressors in the FLEX series, have been specially developed according to the most recent findings in research and technology. They are used in all situations where compressed air needs to be generated by a small, compact and extremely quiet plant, even directly in the workplace.
 
It is precisely in this area that, with its integrated single-shaft solution, the FLEX series provides TOP -totally uncompromising technology in the speed-controlled version:
 
Compact, fully integrated compressor unit.
High performance, virtually silent, small footprint.
Energy-saving speed control.
Direct drive without transmission losses (single shaft solution).
Flexible operating pressure 5 - 13 bars, infinite adjustment.
Clear, easy-to-maintain set-up.
The "integriated single-shaft solution" from ALMiG.
(Image equivalent in structure to the FLEX 6 - 30).
Market analyses show that on average capacity utilisation of compressors is around 50 - 70%. The maximum delivery quantity is only required at peak times. This has prompted us to develop the ALMiG SCD technology which demonstrates its greatest strength in the partial load range, i.e. exactly where it is required. 
 
SCD technology stands for:
  • Speed Controlled and
  • Direct drive
  • The combination of speed control and direct drive, results in an extremely efficient, holistic drive concept.
Do you have money to give away?

The up to 35% energy saving potential is achieved by means of:
 
  • Speed control
  • Constant, 5 - 13 bar network pressure, infinitely adjustable.
  • Extremely good plant efficiency.
  • No starting or switch-over peak loads.
  • No expensive idling time.

 

Download brochure here (368kB)

Screw compressors

FLEX   Power class: 3 - 30 kW

 
Up to 35% energy savings, thanks to SCD technology
 
Power class: 3 - 30 kW
 
The speed-controlled, direct-driven screw compressors in the FLEX series, have been specially developed according to the most recent findings in research and technology. They are used in all situations where compressed air needs to be generated by a small, compact and extremely quiet plant, even directly in the workplace.
 
It is precisely in this area that, with its integrated single-shaft solution, the FLEX series provides TOP -totally uncompromising technology in the speed-controlled version:
 
Compact, fully integrated compressor unit.
High performance, virtually silent, small footprint.
Energy-saving speed control.
Direct drive without transmission losses (single shaft solution).
Flexible operating pressure 5 - 13 bars, infinite adjustment.
Clear, easy-to-maintain set-up.
The "integriated single-shaft solution" from ALMiG.
(Image equivalent in structure to the FLEX 6 - 30).
Market analyses show that on average capacity utilisation of compressors is around 50 - 70%. The maximum delivery quantity is only required at peak times. This has prompted us to develop the ALMiG SCD technology which demonstrates its greatest strength in the partial load range, i.e. exactly where it is required. 
 
SCD technology stands for:
  • Speed Controlled and
  • Direct drive
  • The combination of speed control and direct drive, results in an extremely efficient, holistic drive concept.
Do you have money to give away?

The up to 35% energy saving potential is achieved by means of:
 
  • Speed control
  • Constant, 5 - 13 bar network pressure, infinitely adjustable.
  • Extremely good plant efficiency.
  • No starting or switch-over peak loads.
  • No expensive idling time.

 

Download brochure here (368kB)